LAMXO1200E-3TN100E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | LA-MachXO |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LAMXO1200 |
| Pin Count | 100 |
| Number of Outputs | 73 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Number of I/O | 73 |
| Nominal Supply Current | 18mA |
| Memory Type | SRAM |
| Clock Frequency | 25MHz |
| Propagation Delay | 5.1 ns |
| Turn On Delay Time | 5.1 ns |
| Number of Logic Elements/Cells | 1200 |
| Number of Logic Blocks (LABs) | 150 |
| Output Function | MACROCELL |
| Number of Macro Cells | 600 |
| Voltage Supply - Internal | 1.14V~1.26V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LAMXO1200E-3TN100E Overview
There are 600 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is part of the 100-LQFP package.There are 73 I/Os on the board.The device is programmed with 100 terminations.There is a QUADterminal position on the electrical part in question.An electrical supply voltage of 1.2V is used to power it.This part is part of the family [0].It is packaged in the way of Tray.The device operates at a temperature of -40°C~125°C TAin order to ensure its reliability.Surface Mountshould be used for mounting the chip.It is a type of FPGA belonging to the LA-MachXO series.There are 100 pins on the chip.Its related parts can be found in the [0].If high efficiency is desired, the supply voltage should be kept at [0].Data storage is performed using [0].This electronic part is mounted in the way of Surface Mount.The 100pins are designed into the board.There is a maximum supply voltage of 1.26V.A minimum supply voltage of 1.14V is required for it to operate.The system consists of 150 logic blocks (LABs).Fundamental building blocks consist of 1200logic elements/cells.The clock frequency of this device should not exceed 25MHz.This device is configured to output [0].
LAMXO1200E-3TN100E Features
100-LQFP package
73 I/Os
The operating temperature of -40°C~125°C TA
100 pin count
100 pins
150 logic blocks (LABs)
73 outputs
LAMXO1200E-3TN100E Applications
There are a lot of Lattice Semiconductor Corporation LAMXO1200E-3TN100E CPLDs applications.
- Reset swapping
- Software-driven hardware configuration
- Dedicated input registers
- Timing control
- Programmable power management
- Power up sequencing
- Wide Vin Industrial low power SMPS
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- USB Bus
- State machine control
