LAMXO1200E-3TN144E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | LA-MachXO |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LAMXO1200 |
| Pin Count | 144 |
| Number of Outputs | 113 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Number of I/O | 113 |
| Nominal Supply Current | 18mA |
| Memory Type | SRAM |
| Clock Frequency | 25MHz |
| Propagation Delay | 5.1 ns |
| Number of Logic Elements/Cells | 1200 |
| Screening Level | AEC-Q100 |
| Number of Logic Blocks (LABs) | 150 |
| Output Function | MACROCELL |
| Number of Macro Cells | 600 |
| Voltage Supply - Internal | 1.14V~1.26V |
| Delay Time tpd(1) Max | 5.1ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LAMXO1200E-3TN144E Overview
There are 600 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is packaged with 144-LQFP.There are 113 I/Os on the board.The termination of a device is set to [0].This electrical component has a terminal position of 0.The power source is powered by 1.2Vvolts.There is a part in the family [0].It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the LA-MachXO series.With 144pins programmed, the chip is ready to use.The LAMXO1200contains its related parts.In order to achieve high efficiency, the supply voltage should be maintained at [0].In order to store data, SRAMis used.Surface Mountis used to mount this electronic component.The device has a pinout of [0].This device operates at a voltage of 1.26Vas its maximum supply voltage.A minimum supply voltage of 1.14V is required for it to operate.The program consists of 150 logic blocks (LABs).A fundamental building block of logic consists of 1200logic elements/cells.It should not exceed 25MHzin its clock frequency.The device is configured with an output of [0].
LAMXO1200E-3TN144E Features
144-LQFP package
113 I/Os
The operating temperature of -40°C~125°C TA
144 pin count
144 pins
150 logic blocks (LABs)
113 outputs
LAMXO1200E-3TN144E Applications
There are a lot of Lattice Semiconductor Corporation LAMXO1200E-3TN144E CPLDs applications.
- Multiple Clock Source Selection
- STANDARD SERIAL INTERFACE UART
- POWER-SAVING MODES
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- DMA control
- I/O PORTS (MCU MODULE)
- Auxiliary Power Supply Isolated and Non-isolated
- Software-driven hardware configuration
- USB Bus
