LAMXO2280E-3TN100E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | LA-MachXO |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LAMXO2280 |
| Pin Count | 100 |
| Number of Outputs | 73 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Number of I/O | 73 |
| Nominal Supply Current | 20mA |
| Memory Type | SRAM |
| Clock Frequency | 25MHz |
| Propagation Delay | 5.1 ns |
| Number of Logic Elements/Cells | 2280 |
| Number of Logic Blocks (LABs) | 285 |
| Output Function | MACROCELL |
| Number of Macro Cells | 1140 |
| Voltage Supply - Internal | 1.14V~1.26V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LAMXO2280E-3TN100E Overview
There are 1140 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the 100-LQFPpackage, you will find it.The device is programmed with 73 I/Os.There is a 100terminations set on devices.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered by a voltage of 1.2V volts.It is a part of the family [0].Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].Ensure that the chip is mounted by Surface Mount.The FPGA belongs to the LA-MachXO series.There are 100 pins on the chip.According to the LAMXO2280, its related parts can be found.If high efficiency is desired, the supply voltage should be kept at [0].Data storage is performed using [0].Surface Mountis the mounting point of this electronic part.The 100pins are designed into the board.A maximum supply voltage of 1.26Vis used in its operation.The device is designed to operate with a minimal supply voltage of 1.14VV.Its basic building block is composed of 285 logic blocks (LABs).As a fundamental building block, there are 2280 logic elements/cells.Ideally, its clock frequency should not exceed 25MHz.A 73output is configured for this device.
LAMXO2280E-3TN100E Features
100-LQFP package
73 I/Os
The operating temperature of -40°C~125°C TA
100 pin count
100 pins
285 logic blocks (LABs)
73 outputs
LAMXO2280E-3TN100E Applications
There are a lot of Lattice Semiconductor Corporation LAMXO2280E-3TN100E CPLDs applications.
- Power automation
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- POWER-SAVING MODES
- Protection relays
- PLC analog input modules
- Software-Driven Hardware Configuration
- White goods (Washing, Cold, Aircon ,...)
- TIMERS/COUNTERS
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Dedicated input registers
