LAMXO256E-3TN100E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | LA-MachXO |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LAMXO256 |
| Pin Count | 100 |
| Number of Outputs | 78 |
| Operating Supply Voltage | 1.2V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 256B |
| Number of I/O | 78 |
| Nominal Supply Current | 10mA |
| Memory Type | SRAM |
| Clock Frequency | 25MHz |
| Propagation Delay | 4.9 ns |
| Turn On Delay Time | 4.9 ns |
| Number of Logic Elements/Cells | 256 |
| Number of Logic Blocks (LABs) | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| Number of Logic Cells | 256 |
| Voltage Supply - Internal | 1.14V~1.26V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LAMXO256E-3TN100E Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is part of the 100-LQFP package.There are 78 I/Os on the board.The device is programmed with 100 terminations.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The device is powered by a voltage of 1.2V volts.This part is included in Field Programmable Gate Arrays.It is recommended that the chip be packaged by Tray.It operates with the operating temperature of -40°C~125°C TA to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.FPGAs belonging to the LA-MachXOseries contain this type of chip.With 100pins programmed, the chip is ready to use.The LAMXO256indicates that its related parts can be found.In order to maintain high efficiency, the supply voltage should be maintained at [0].SRAM is adopted for storing data.A Surface Mountis mounted on this electronic component.There are 100 pins on the device.A voltage of 1.26V is the maximum supply voltage for this device.With a minimal supply voltage of [0], it operates.There are 32logic blocks (LABs) that make up its basic building block.As a fundamental building block, there are 256 logic elements/cells.Ideally, its clock frequency should not exceed 25MHz.Devices are equipped with a memory capacity of 256Bfor storing programs and data.This device has 78outputs configured.
LAMXO256E-3TN100E Features
100-LQFP package
78 I/Os
The operating temperature of -40°C~125°C TA
100 pin count
100 pins
32 logic blocks (LABs)
78 outputs
LAMXO256E-3TN100E Applications
There are a lot of Lattice Semiconductor Corporation LAMXO256E-3TN100E CPLDs applications.
- DDC INTERFACE
- Page register
- Random logic replacement
- Field programmable gate
- Power up sequencing
- State machine control
- Parity generators
- Configurable Addressing of I/O Boards
- Portable digital devices
- Software Configuration of Add-In Boards
