LAMXO640E-3FTN256E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | LA-MachXO |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LAMXO640 |
| Pin Count | 256 |
| Number of Outputs | 159 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 768B |
| Number of I/O | 159 |
| Nominal Supply Current | 14mA |
| Memory Type | SRAM |
| Clock Frequency | 25MHz |
| Propagation Delay | 4.9 ns |
| Number of Logic Elements/Cells | 640 |
| Screening Level | AEC-Q100 |
| Number of Logic Blocks (LABs) | 80 |
| Output Function | MACROCELL |
| Number of Macro Cells | 320 |
| Number of Logic Cells | 640 |
| Voltage Supply - Internal | 1.14V~1.26V |
| Height Seated (Max) | 1.55mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LAMXO640E-3FTN256E Overview
Currently, there are 320 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is contained in package [0].The device is programmed with 159 I/Os.256terminations have been programmed into the device.BOTTOMis the terminal position of this electrical part.A voltage of 1.2Vprovides power to the device.It belongs to the family [0].It is recommended that the chip be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].Mount the chip by Surface Mount.It belongs to the LA-MachXOseries of FPGAs.It is programmed with 256 pins.LAMXO640contains its related parts.In order to maintain high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].The electronic component is mounted by Surface Mount.This board has 256 pins.There is a maximum supply voltage of 1.26V.The device is designed to operate with a minimal supply voltage of 1.14VV.It consists of 80 logic blocks (LABs).A fundamental building block of logic consists of 640logic elements/cells.This device should not have an clock frequency greater than 25MHz.In the devices, a memory of 768Bis provided for the storage of programs and data.It is configured with 159 output.
LAMXO640E-3FTN256E Features
256-LBGA package
159 I/Os
The operating temperature of -40°C~125°C TA
256 pin count
256 pins
80 logic blocks (LABs)
159 outputs
LAMXO640E-3FTN256E Applications
There are a lot of Lattice Semiconductor Corporation LAMXO640E-3FTN256E CPLDs applications.
- LED Lighting systems
- Software-driven hardware configuration
- D/T registers and latches
- Reset swapping
- POWER-SAVING MODES
- I2C BUS INTERFACE
- Battery operated portable devices
- Address decoders
- Storage Cards and Storage Racks
- I/O expansion
