LB11620T-TLM-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~100°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES IN 4.5 TO 5.5V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Controller - Commutation, Direction Management |
| Qualification Status | Not Qualified |
| Output Voltage | 5.3V |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | PWM |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Output Configuration | Pre-Driver - Half Bridge (3) |
| Power Dissipation | 800mW |
| Output Current | 25mA |
| Supply Current-Max (Isup) | 16mA |
| Collector Emitter Voltage (VCEO) | 17V |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1mm |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LB11620T-TLM-E Overview
The package is designed with [0].There is 24-TFSOP (0.173, 4.40mm Width) case included with the part.In general, it is recommended that the part be mounted by Surface Mount.I believe it would be suitable for the component connected to General Purpose.The device can supply 4.5V~5.5V 8V~17V volts.This device operates at a temperature of -20°C~100°C TA.There is a motor type Brushless DC (BLDC)associated with this motor type.The part has 24terminations available.Drivers controllers is important to note that this amplifier should be operated at the 12Vsetting.A Surface Mountmounting method is recommended for this product.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.There are 24 pins on it.This is part of the Motion Control Electronics series.A constant voltage is maintained at 5.3V.This motor type can be recognized as Brushless DC (BLDC).With a 25mA output current, it offers maximal design flexibility.The characteristic of ALSO OPERATES IN 4.5 TO 5.5V SUPPLYis also present.
LB11620T-TLM-E Features
Applications : General Purpose
Motor Type classified as Brushless DC (BLDC)
Additional Feature: ALSO OPERATES IN 4.5 TO 5.5V SUPPLY
LB11620T-TLM-E Applications
There are a lot of ON Semiconductor LB11620T-TLM-E motor drivers applications.
- Industrial high-bay lights
- Outdoor area lights
- Dome
- Infotainment backlighting
- Industrial lighting
- Scanning equipment
- Charge pump circuits
- Arena lighting
- Digital still cameras
- Step-up or step-down driver topologies
