LB11660RV-TLM-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-LSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -30°C~95°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Fan Motor Driver |
| Additional Feature | ALSO OPERATES IN 3 TO 15V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | Parallel, PWM |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 12mA |
| Output Configuration | High Side (2) |
| Power Dissipation | 800mW |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 15V |
| Max Collector Current | 1.5A |
| Voltage - Load | 3V~15V |
| Switching Frequency | 23kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.3mm |
| Length | 5.2mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LB11660RV-TLM-E Overview
There is a Tape & Reel (TR)package included in the design.A 16-LSSOP (0.173, 4.40mm Width)case is included with the part.A mounting position of Surface Mountis recommended for the part.Fits the component connected to Fan Motor Driver.There is a possibility of providing 4V~15Vvolts through the device.Drivers controllers operates wDrivers controllershin a range of -30°C~95°C TAdegrees Celsius.In this case, the motor type is Brushless DC (BLDC).The part supports 16terminations.At a rate of [0], voltage can be applied to the load.Drivers controllers is recommended that this amplifier be run at 12V.In terms of mounting, it is recommended that it be mounted in Surface Mount.The device employs the BRUSHLESS DC MOTOR CONTROLLER analog IC.This device is designed with a pin count of 16.The item belongs to the Motion Control Electronics series.Drivers controllers is possible to recognize Brushless DC (BLDC)as the type of motor.The characteristic of ALSO OPERATES IN 3 TO 15V SUPPLYis also present.
LB11660RV-TLM-E Features
Applications : Fan Motor Driver
Load voltage across the chip 3V~15V
Motor Type classified as Brushless DC (BLDC)
Additional Feature: ALSO OPERATES IN 3 TO 15V SUPPLY
LB11660RV-TLM-E Applications
There are a lot of ON Semiconductor LB11660RV-TLM-E motor drivers applications.
- Commercial office
- Step-up or step-down driver topologies
- Tunnel lights
- Monitoring the energy that the luminaire uses
- Mobile phone display backlight and key light driving
- LED ballasts
- Footwell lighting
- Smart lighting applications
- LED bias
- High brightness LED lighting
