LB11683H-MPB-E
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOP (0.311, 7.90mm Width) Exposed Pad + 2 Heat Tabs |
| Number of Pins | 28 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Box (TB) |
| Published | 2007 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 5.5V TO 7V SUPPLY |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 5.5V~13.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LB11683 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 7V |
| Supply Voltage-Min (Vsup) | 7V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 15mA |
| Output Configuration | Half Bridge (3) |
| Power Dissipation | 800mW |
| Current - Output | 1.5A |
| Voltage - Load | 5.5V~13.8V |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height Seated (Max) | 2.45mm |
| Width | 7.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LB11683H-MPB-E Overview
There is a Tape & Box (TB)package included in the design.Drivers controllers is packaged wDrivers controllersh a 28-SOP (0.311, 7.90mm Width) Exposed Pad + 2 Heat Tabs case.Mounting the part by Surface Mountis recommended.I believe it is suitable for the component connected to General Purpose.This device is capable of supplying voltages up to 5.5V~13.8V volts.The operating temperature ranges from -30°C~85°C TAto -30°C~85°C TA.There is a motor type Brushless DC (BLDC)available.The part has 28terminations available.In this case, the voltage can be applied to the load at the rate of 5.5V~13.8V.I would like to remind you that this amplifier should be operated at 12V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Set the part's output current to 1.5A.An analog IC with the model number BRUSHLESS DC MOTOR CONTROLLERis employed in the device.LB11683is the part number that finds it.A device with 28pins is available.This is part of the Motion Control Electronics series.There are a total of 1outputs available.The driver operates on a supply voltage of 7V volts.Drivers controllers also has a characteristic of [0].
LB11683H-MPB-E Features
Applications : General Purpose
Load voltage across the chip 5.5V~13.8V
base on LB11683 number
designed with 1 outputs
Additional Feature: ALSO REQUIRES 5.5V TO 7V SUPPLY
LB11683H-MPB-E Applications
There are a lot of ON Semiconductor LB11683H-MPB-E motor drivers applications.
- Automotive exterior and interior lighting
- Step-up or step-down driver topologies
- Hidden coves in high-end residential settings
- Tunnel lights
- Camera-enabled smartphones
- Brake lights
- AM radio
- Multiple output capability
- Street lights
- High power LED street light
