LB11683H-TLM-E
| Parameters | |
|---|---|
| Voltage - Load | 5.5V~13.8V |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height Seated (Max) | 2.45mm |
| Width | 7.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOP (0.311, 7.90mm Width) Exposed Pad + 2 Heat Tabs |
| Number of Pins | 28 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 5.5V TO 7V SUPPLY |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 5.5V~13.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LB11683 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 7V |
| Supply Voltage-Min (Vsup) | 7V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 15mA |
| Output Configuration | Half Bridge (3) |
| Power Dissipation | 800mW |
| Current - Output | 1.5A |
LB11683H-TLM-E Overview
There is a Tape & Reel (TR)package included in the design.This part is packed in a 28-SOP (0.311, 7.90mm Width) Exposed Pad + 2 Heat Tabs case.The part should be mounted by Surface Mount.As a result, it is appropriate for the component connected to General Purpose.Drivers controllers is capable of supplying 5.5V~13.8V volts.A range of -30°C~85°C TAis available for operating temperature.Motors can be classified as Brushless DC (BLDC).In this part, there are 28 terminations available.In this case, the voltage can be applied to the load at the rate of 5.5V~13.8V.Please take in mind that this amplifier should be run at 12V.Ideally, it should be mounted in the Surface Mountposition.The output current should remain at 1.5A.There is an analog integrated circuit BRUSHLESS DC MOTOR CONTROLLERpresent in the device.The part number LB11683indicates that it is found.28pins are present on the device.In the Motion Control Electronicsseries, it is included.The number of outputs available is [0].The driver operates on a supply voltage of 7V volts.In addition to this, it is also characterized by ALSO REQUIRES 5.5V TO 7V SUPPLY.
LB11683H-TLM-E Features
Applications : General Purpose
Load voltage across the chip 5.5V~13.8V
base on LB11683 number
designed with 1 outputs
Additional Feature: ALSO REQUIRES 5.5V TO 7V SUPPLY
LB11683H-TLM-E Applications
There are a lot of ON Semiconductor LB11683H-TLM-E motor drivers applications.
- Dome
- Infotainment backlighting
- A cross between entertainment
- High power LED street light
- Turn signals
- AM radio
- Tunnel lights
- Monitoring the energy that the luminaire uses
- Lighting for health and wellbeing
- Running preventive- maintenance diagnostics
