LB11685AV-TLM-H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-LSOP (0.220, 5.60mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LB11685 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Max Output Current | 1.2A |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (3) |
| Power Dissipation | 1.05W |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 20mA |
| Collector Emitter Voltage (VCEO) | 18V |
| Max Collector Current | 1.2A |
| Voltage - Load | 4.5V~18V |
| Switching Frequency | 8.6kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.3mm |
| Length | 9.75mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LB11685AV-TLM-H Overview
This package was designed with Tape & Reel (TR)in mind.This part is packaged with a case of [0].Drivers controllers is recommended to mount the part by Surface Mount.As a result, it is appropriate for the component connected to General Purpose.In this case, the device can supply 4.5V~18V volts.Operation temperature ranges from -40°C~150°C TJ.Drivers controllers is possible to categorize the motor type as Brushless DC (BLDC).This part offers 24terminations.Drivers controllers is possible to apply voltage at a rate of 4.5V~18Vto the load.The amplifier should be set to 5V.Surface Mountis the recommended mounting method.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.Drivers controllers is based on the LB11685 part number.24pins are available on the device.In the Motion Control Electronicsseries, it is included.1outputs are available.Drivers controllers is possible to recognize the motor type as [0].Its maximal output current reaches 1.2A to meet the operation requirements.
LB11685AV-TLM-H Features
Applications : General Purpose
Load voltage across the chip 4.5V~18V
base on LB11685 number
designed with 1 outputs
Motor Type classified as Brushless DC (BLDC)
LB11685AV-TLM-H Applications
There are a lot of ON Semiconductor LB11685AV-TLM-H motor drivers applications.
- Fog lamps
- Running preventive- maintenance diagnostics
- Indicator circuit
- LCD displays
- Lighting for health and wellbeing
- Daytime running lights (DRLs)
- High brightness LED lighting
- General lighting
- Human-centric lighting
- RGB and monochromatic LED drivers for signage and traffic signals
