LB11693JH-TLM-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-SOP (0.311, 7.90mm Width) Exposed Pad + 2 Heat Tabs |
| Number of Pins | 36 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 8V~28V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 24V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Output Voltage | 5.3V |
| Power Supplies | 24V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | PWM |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (3) |
| Power Dissipation | 900mW |
| Logic Function | AND |
| Supply Current-Max (Isup) | 13.5mA |
| Collector Emitter Voltage (VCEO) | 28V |
| Max Collector Current | 1.8A |
| Voltage - Load | 8V~28V |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 2.25mm |
| Length | 17.8mm |
| Width | 7.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LB11693JH-TLM-E Overview
The package is designed with [0].The part is packaged in a 36-SOP (0.311, 7.90mm Width) Exposed Pad + 2 Heat Tabs case.Drivers controllers is recommended that the part be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.8V~28V volts can be supplied by the device.A range of -40°C~85°C TAis available for operating temperature.Motors can be classified as Brushless DC (BLDC).This part has 36termination options.Drivers controllers is possible to apply voltage to the load at the rate of 8V~28V.In order to get the best performance from this amplifier, it should be run at 24V.Its recommended mounting way is Surface Mount.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.This device is designed with a pin count of 36.Drivers controllers is a part of the Motion Control Electronics series.In this case, the output voltage is maintained at 5.3V.As a result, we can recognize that the motor type is Brushless DC (BLDC).
LB11693JH-TLM-E Features
Applications : General Purpose
Load voltage across the chip 8V~28V
Motor Type classified as Brushless DC (BLDC)
LB11693JH-TLM-E Applications
There are a lot of ON Semiconductor LB11693JH-TLM-E motor drivers applications.
- Daytime running lights (DRLs)
- Telltale lights
- PDAs
- Display LED backlighting
- LED bias
- CHMSL (center high-mount stop lamps)
- Outdoor area lights
- High brightness LED lighting
- Scanning equipment
- drivers for outdoor application
