LB11847-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 month ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-SDIP (0.500, 12.70mm) Exposed Pad |
| Number of Pins | 30 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Base Part Number | LB11847 |
| JESD-30 Code | R-PDIP-T28 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Power Supplies | 545V |
| Interface | Parallel |
| Nominal Supply Current | 26mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.5A |
| Supply Current-Max (Isup) | 5mA |
| Voltage - Load | 10V~45V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8, 1/16 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LB11847-E Overview
There is a Tubepackage included in the design.28-SDIP (0.500, 12.70mm) Exposed Padcases are included with the part.In general, it is recommended that the part be mounted by Through Hole.The component connected in General Purposeis compatible with it.Drivers controllers is capable of supplying 4.75V~5.25V volts.A range of -20°C~85°C TAis available for operating temperature.This part provides 28terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.Its recommended mounting way is Through Hole.Set the part's output current to 1.5A.Using the LB11847part number, it is located.The device has 30 pins.Drivers controllers is part of the series [0].There are 1 outputs available.Stepperrepresents the motor type.
LB11847-E Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on LB11847 number
designed with 1 outputs
Motor Type classified as Stepper
LB11847-E Applications
There are a lot of ON Semiconductor LB11847-E motor drivers applications.
- Automotive exterior and interior lighting
- Large format LED backlighting
- Monitoring the energy that the luminaire uses
- Side marker lights
- Indicator circuit
- PDAs
- Camera-enabled smartphones
- Architectural lighting
- AM radio
- PWM generators
