LB11872H-TLM-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOP (0.311, 7.90mm Width) Exposed Pad + 2 Heat Tabs |
| Number of Pins | 28 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Polygonal Mirror |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 10V~28V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 24V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Output Voltage | 6.6V |
| Power Supplies | 24V |
| Supply Voltage-Min (Vsup) | 10V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 7mA |
| Output Configuration | Half Bridge (3) |
| Power Dissipation | 800mW |
| Logic Function | AND |
| Supply Current-Max (Isup) | 22mA |
| Collector Emitter Voltage (VCEO) | 28V |
| Max Collector Current | 1.2A |
| Voltage - Load | 10V~28V |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 2.25mm |
| Length | 15.2mm |
| Width | 7.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LB11872H-TLM-E Overview
Drivers controllers is designed with Tape & Reel (TR) package.A 28-SOP (0.311, 7.90mm Width) Exposed Pad + 2 Heat Tabscase is included with the part.A mounting position of Surface Mountis recommended for the part.The component connected in Polygonal Mirroris compatible with it.10V~28V volts can be supplied by the device.Drivers controllers operates wDrivers controllershin a range of -20°C~85°C TAdegrees Celsius.Drivers controllers is possible to categorize the motor type as Brushless DC (BLDC).There are 28 terminations available on this part.In this case, the voltage can be applied to the load at the rate of 10V~28V.I would like to remind you that this amplifier should be operated at 24V.The recommended way to mount it is Surface Mount.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in this device.28pins are used in its design.The item belongs to the Motion Control Electronics series.Continually maintains the output voltage at 6.6V.The motor type can be recognized as Brushless DC (BLDC).
LB11872H-TLM-E Features
Applications : Polygonal Mirror
Load voltage across the chip 10V~28V
Motor Type classified as Brushless DC (BLDC)
LB11872H-TLM-E Applications
There are a lot of ON Semiconductor LB11872H-TLM-E motor drivers applications.
- Digital still cameras
- Home lighting systems
- Lighting for health and wellbeing
- Arena lighting
- A cross between entertainment
- Indicator
- LED bias
- High power LED street light
- Landscape lighting
- Daytime running lights (DRLs)
