LB11970FV-TLM-H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-LSOP (0.173, 4.40mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -30°C~90°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 18 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Fan Motor Driver |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LB11970 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Parallel, PWM |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 18mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 800mW |
| Logic Function | AND |
| Halogen Free | Halogen Free |
| Collector Emitter Voltage (VCEO) | 17V |
| Max Collector Current | 1.2A |
| Voltage - Load | 3.5V~16V |
| Switching Frequency | 25kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.5mm |
| Length | 8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LB11970FV-TLM-H Overview
The design contains a Tape & Reel (TR)package.18-LSOP (0.173, 4.40mm Width)cases are included with the part.Drivers controllers is recommended to mount the part by Surface Mount.For the component connected to [0], it is suitable.There is a capability for the device to provide 4.5V~16V volts.A range of -30°C~90°C TAis available for operating temperature.This motor type can be categorized as Brushless DC (BLDC).The part has 18terminations available.If the voltage is applied to the load at the rate of [0], the load will be affected.I would like to remind you that this amplifier should be operated at 12V.There is a recommended mounting method of Surface Mount.In this device, the analog IC BRUSHLESS DC MOTOR CONTROLLERis employed.Drivers controllers is based on the LB11970 part number.Drivers controllers is designed wDrivers controllersh 18 pins.Drivers controllers belongs to the series [0].There are 1 outputs available.Drivers controllers is possible to recognize Brushless DC (BLDC)as the type of motor.
LB11970FV-TLM-H Features
Applications : Fan Motor Driver
Load voltage across the chip 3.5V~16V
base on LB11970 number
designed with 1 outputs
Motor Type classified as Brushless DC (BLDC)
LB11970FV-TLM-H Applications
There are a lot of ON Semiconductor LB11970FV-TLM-H motor drivers applications.
- Alternative to HID lights
- Tail lights
- A cross between entertainment
- Step-up or step-down driver topologies
- Daytime running lights (DRLs)
- Landscape lighting
- Outdoor area lights
- Large outdoor LED display
- Building technology
- Indicator
