LB11983-E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Supplier Device Package | 20-DIP |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Box (TB) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Applications | Fan Motor Driver |
| Technology | Bipolar |
| Voltage - Supply | 7V~13.8V |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Interface | Parallel |
| Output Configuration | Half Bridge (3) |
| Current - Output | 1A |
| Voltage - Load | 7V~13.8V |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| RoHS Status | ROHS3 Compliant |
LB11983-E Overview
This package is designed to work with [0].20-DIP (0.300, 7.62mm)cases are included with the part.In most cases, it is recommended to mount the part at Through Hole.In this case, it is appropriate for the component connected to Fan Motor Driver.There is a possibility of providing 7V~13.8Vvolts through the device.Operation temperature ranges from -30°C~85°C TA.There is a motor type Brushless DC (BLDC)available.If the voltage is applied to the load at the rate of [0], the load will be affected.Maintain a current of 1Afor the part output.
LB11983-E Features
Applications : Fan Motor Driver
Load voltage across the chip 7V~13.8V
LB11983-E Applications
There are a lot of Rochester Electronics, LLC LB11983-E motor drivers applications.
- Large outdoor LED display
- Mobile phone display backlight and key light driving
- Charge pump circuits
- RGB and monochromatic LED drivers for signage and traffic signals
- Commercial office
- CHMSL (center high-mount stop lamps)
- Street lights
- Daytime running lights (DRLs)
- drivers for outdoor application
- Landscape lighting
