LB11988H-TLM-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOP (0.311, 7.90mm Width) Exposed Pad + 2 Heat Tabs |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Fan Motor Driver |
| Additional Feature | OUTPUT BLOCK POWER SUPPLY IS 5 TO 22 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 7V~22V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G28 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 22V |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 7V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 24mA |
| Output Configuration | Half Bridge (3) |
| Power Dissipation | 800mW |
| Current - Output | 1.3A |
| Logic Function | AND |
| Voltage - Load | 5V~22V |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height Seated (Max) | 2.45mm |
| Length | 15.2mm |
| Width | 7.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LB11988H-TLM-E Overview
The design contains a Tape & Reel (TR)package.Drivers controllers is packaged wDrivers controllersh a 28-SOP (0.311, 7.90mm Width) Exposed Pad + 2 Heat Tabs case.Surface Mountshould be used for mounting the part.The component connected in Fan Motor Driveris compatible with it.The device is capable of supplying a voltage of 7V~22V volts.Operation temperature ranges from -30°C~85°C TA.Drivers controllers is possible to categorize the motor type as Brushless DC (BLDC).In this part, there are 28 terminations available.You can apply voltage at 5V~22Vto the load.Please take in mind that this amplifier should be run at 12V.The recommended mounting method is Surface Mount.Maintain the current output of the part at 1.3A volts.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.Drivers controllers belongs to the series [0].A supply voltage of 22V is required for the operation of this driver.Also, OUTPUT BLOCK POWER SUPPLY IS 5 TO 22can be found as a characteristic of this type.
LB11988H-TLM-E Features
Applications : Fan Motor Driver
Load voltage across the chip 5V~22V
Additional Feature: OUTPUT BLOCK POWER SUPPLY IS 5 TO 22
LB11988H-TLM-E Applications
There are a lot of ON Semiconductor LB11988H-TLM-E motor drivers applications.
- Indicator circuit
- Mobile phone display backlight and key light driving
- Smart lighting applications
- Tunnel lights
- Lighting for health and wellbeing
- Matrix LED dimmers
- Emergency lighting
- Lighting for the ambience of tunability
- Commercial office
- RGB and monochromatic LED drivers for signage and traffic signals
