LB11988HR-MPB-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOP (0.311, 7.90mm Width) Exposed Pad + 2 Heat Tabs |
| Number of Pins | 30 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Fan Motor Driver |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 5V~22V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G28 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 22V |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 24mA |
| Output Configuration | Half Bridge (3) |
| Power Dissipation | 800mW |
| Current - Output | 1.3A |
| Logic Function | AND |
| Voltage - Load | 5V~22V |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height Seated (Max) | 2.45mm |
| Length | 15.2mm |
| Width | 7.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LB11988HR-MPB-E Overview
This package is designed to work with [0].28-SOP (0.311, 7.90mm Width) Exposed Pad + 2 Heat Tabscases are included with the part.In general, it is recommended that the part be mounted by Surface Mount.I believe it is suitable for the component connected to Fan Motor Driver.5V~22V volts can be supplied by the device.The operating temperature ranges from -40°C~85°C TAto -40°C~85°C TA.A motor of this type can be categorized as Brushless DC (BLDC).There are 28 terminations available on this part.If the voltage is applied to the load at the rate of [0], the load will be affected.This amplifier should be operated at 12V.Surface Mountis its recommended mounting method.Set the part's output current to 1.3A.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.In this device, there are 30 pins.The Motion Control Electronicsseries contains it.
LB11988HR-MPB-E Features
Applications : Fan Motor Driver
Load voltage across the chip 5V~22V
LB11988HR-MPB-E Applications
There are a lot of ON Semiconductor LB11988HR-MPB-E motor drivers applications.
- Alternative to HID lights
- Indicator circuit
- parking lights
- Building technology
- AM radio
- Home lighting systems
- drivers for outdoor application
- Dash
- High brightness LED lighting
- Handheld devices
