LB11988V-TLM-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-LSOP (0.220, 5.60mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -30°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Fan Motor Driver |
| Additional Feature | OUTPUT BLOCK POWER SUPPLY IS 5 TO 22 |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 7V~22V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LB11988 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Supply Voltage-Min (Vsup) | 7V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 24mA |
| Output Configuration | Half Bridge (3) |
| Power Dissipation | 500mW |
| Collector Emitter Voltage (VCEO) | 22V |
| Max Collector Current | 1.3A |
| Voltage - Load | 5V~22V |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.3mm |
| Length | 9.75mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LB11988V-TLM-E Overview
The design contains a Tape & Reel (TR)package.The part is packged with 24-LSOP (0.220, 5.60mm Width) case.Ideally, the part should be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in Fan Motor Driver.In this case, the device can supply 7V~22V volts.Drivers controllers operates wDrivers controllershin a range of -30°C~75°C TAdegrees Celsius.In this case, the motor type is Brushless DC (BLDC).There are 24 terminations available in the part.Drivers controllers is possible to apply voltage at a rate of 5V~22Vto the load.Drivers controllers is recommended that this amplifier be run at 12V.There is a recommended mounting method of Surface Mount.In this device, the analog IC BRUSHLESS DC MOTOR CONTROLLERis employed.According to the LB11988part number, the part is found.24 pins are provided for its design.The Motion Control Electronicsseries includes this item.A total of 1outputs are available.Drivers controllers is possible to recognize Brushless DC (BLDC)as the type of motor.The characteristic of OUTPUT BLOCK POWER SUPPLY IS 5 TO 22is also present.
LB11988V-TLM-E Features
Applications : Fan Motor Driver
Load voltage across the chip 5V~22V
base on LB11988 number
designed with 1 outputs
Motor Type classified as Brushless DC (BLDC)
Additional Feature: OUTPUT BLOCK POWER SUPPLY IS 5 TO 22
LB11988V-TLM-E Applications
There are a lot of ON Semiconductor LB11988V-TLM-E motor drivers applications.
- Monitoring the energy that the luminaire uses
- Daytime running lights (DRLs)
- Dome
- LED bias
- Lighting for the ambience of tunability
- RGB and monochromatic LED drivers for signage and traffic signals
- Matrix LED dimmers
- Horticultural applications
- Building technology
- Camera-enabled smartphones
