LB1838JM-MPB-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-LSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Battery Powered |
| Additional Feature | ALSO REQUIRE 1.8V TO 9V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 2.5V~9V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3V |
| Terminal Pitch | 1mm |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 9V |
| Supply Voltage-Max (Vsup) | 9V |
| Power Supplies | 3V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Power Dissipation | 550mW |
| Current - Output | 1A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 18mA |
| Voltage - Load | 1.8V~9V |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 1.7mm |
| Length | 8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LB1838JM-MPB-E Overview
The package is designed with [0].The part is packged with 14-LSOP (0.173, 4.40mm Width) case.Surface Mountshould be used for mounting the part.I believe it is suitable for the component connected to Battery Powered.Drivers controllers is capable of supplying 2.5V~9V volts.In terms of operating temperature, it falls within the range -40°C~85°C TA.In this part, there are 14 terminations available.Drivers controllers is possible to apply voltage at a rate of 1.8V~9Vto the load.The amplifier should be set to 3V.Surface Mountis its recommended mounting method.The output current should be kept at 1A for the part.A STEPPER MOTOR CONTROLLERanalog integrated circuit is employed in the device.This device is designed with a pin count of 14.The Motion Control Electronicsseries contains it.The driver operates on a supply voltage of 9V volts.Also, ALSO REQUIRE 1.8V TO 9Vcan be found as a characteristic of this type.
LB1838JM-MPB-E Features
Applications : Battery Powered
Load voltage across the chip 1.8V~9V
Additional Feature: ALSO REQUIRE 1.8V TO 9V
LB1838JM-MPB-E Applications
There are a lot of ON Semiconductor LB1838JM-MPB-E motor drivers applications.
- Charge pump circuits
- Alternative to HID lights
- High power LED street light
- Indicator circuit
- Landscape lighting
- Commercial office
- Industrial high-bay lights
- PDAs
- Step-up or step-down driver topologies
- Architectural lighting
