LB1843V-MPB-E
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -20°C~80°C TA |
| Packaging | Tape & Box (TB) |
| Published | 1998 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | DC Motors, General Purpose |
| Additional Feature | ALSO OPERATES WITH THE RANGE OF 2.2V TO 9V SUPPLY |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 3V~9V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 7.2V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LB1843 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 9V |
| Power Supplies | 7.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 10μA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 800mW |
| Output Current | 800mA |
| Voltage - Load | 2.2V~9V |
| Fault Protection | Over Temperature |
| Load Type | Inductive |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LB1843V-MPB-E Overview
H bridge is packaged using Tape & Box (TB).H bridge is included in the 20-LSSOP (0.173, 4.40mm Width) package as a cost-saving measure.With the 3V~9V supply voltage, improved reliabilbridge drivery can be achieved.In Surface Mount, H bridge circuit is mounted.In order for -20°C~80°C TA to function normally, motor driver H bridge needs to be kept at a certain temperature.Among H bridge motor drivers many uses, H bridge motor driver can be found in DC Motors, General Purpose as well.H gate is mounted on the PCB using Surface Mount.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 20 terminations are employed.20 pins is used as pronged contacts as H bridge ic of a signal interface.Its base H bridge ic number, LB1843, is used to identify related H bridge ics.To operate H bridge circuit, a voltage supply of 7.2V is required.H bridge circuit has been incorporated with BRUSH DC MOTOR CONTROLLER as its analog IC type.Through the pins of the power supply and output, there is a current of 800mA.A bridge driver's 20 pins work together in order to perform its specific functions.There are 1 outputs on this Hbridge.This H bridge motor driver belongs to the subcategory of Motion Control Electronics and shares several similarities with other parts in that category.A load of electricity is supplied by 7.2V.Furthermore, H-bridge is capable of providing ALSO OPERATES WITH THE RANGE OF 2.2V TO 9V SUPPLY.
LB1843V-MPB-E Features
Available in 20-LSSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : LB1843
With ALSO OPERATES WITH THE RANGE OF 2.2V TO 9V SUPPLY Drivers
LB1843V-MPB-E Applications
There are a lot of ON Semiconductor LB1843V-MPB-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Voltage Regulators
- OA equipments
- Dual DC motor
- Bipolar stepper motor
- High current, low profile DC-DC converters
- Voltage Regulators for DDR memory arrays
- Workstations
- Non-V-Core
- Voltage Regulators for GPUs
- PC peripherals
