LB1843V-TLM-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 14 hours ago) |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 20 |
| Packaging | Cut Tape (CT) |
| Published | 1997 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Max Operating Temperature | 80°C |
| Min Operating Temperature | -20°C |
| Subcategory | Motion Control Electronics |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 7.2V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Max Output Current | 800mA |
| Temperature Grade | COMMERCIAL EXTENDED |
| Max Supply Voltage | 9V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 12mA |
| Output Current | 800mA |
| Supply Current-Max (Isup) | 18mA |
| Collector Emitter Voltage (VCEO) | 9V |
| Max Collector Current | 800mA |
| Motor Type | Brushed |
| Height | 1.3mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LB1843V-TLM-E Overview
For packaging, Cut Tape (CT) is used.In an effort to save money, H bridge is included in the SSOP package.Using Surface Mount, the board is mounted.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 20 terminations are employed.As H bridge ic of a signal interface, 20 pins are used as pronged contacts.A voltage of 7.2V is used as the supply voltage.H bridge circuit is incorporated with BRUSH DC MOTOR CONTROLLER as its analog IC type.At a specified ambient temperature, 800mA is the maximum load current that a power supply can provide.There is 800mA current flowing through the output and power supply pins.It is the 20 pins that enable this bridge driver to perform its specific functions.It is equipped with a 2 output.As part of the Motion Control Electronics subcategory, this H bridge motor driver has various similarities to other parts in this category.As a result of excessive costs, 80°C is the maximum operating temperature that can be tolerated.H bridge is desirable to ensure that the minimum operating temperature is -20°C in order to avoid excessive operating costs.
LB1843V-TLM-E Features
Available in SSOP Package / Case
Operate supply voltage at -20°C
LB1843V-TLM-E Applications
There are a lot of ON Semiconductor LB1843V-TLM-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Telecom Microprocessor
- CD players
- DVD players
- Small Form-Factor Voltage Regulator Modules
- High current, low profile DC-DC converters
- Voltage Regulators
- Compact Blade Servers
- VTR
- Industrial Pumps
- Bipolar stepper motor
