LB1861M-TLM-H
| Parameters | |
|---|---|
| Terminal Pitch | 1mm |
| Base Part Number | LB1861 |
| Pin Count | 14 |
| Operating Supply Voltage | 7V |
| Supply Voltage-Max (Vsup) | 7V |
| Power Supplies | 12/24V |
| Supply Voltage-Min (Vsup) | 6.4V |
| Interface | Logic |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 50mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 1.1W |
| Output Current | 1.5A |
| Halogen Free | Halogen Free |
| Voltage - Load | 12V 24V |
| Fault Protection | Over Temperature |
| Load Type | Inductive |
| Height Seated (Max) | 1.7mm |
| Length | 8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-LSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -30°C~80°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | DC Motors, General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 6.4V~7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 6.7V |
LB1861M-TLM-H Overview
Tape & Reel (TR) is used for packaging.A cost-saving measure is taken to include H bridge in the 14-LSOP (0.173, 4.40mm Width) package.Improved reliabilbridge drivery can be ensured based on the supply voltage of 6.4V~7V.In the way of Surface Mount, H bridge circuit is mounted.Motor driver H bridge works normally at -30°C~80°C TA's operating temperature.A number of applications can be made use of H bridge motor driver, including DC Motors, General Purpose.Using Surface Mount, the board is mounted.Transmission lines are terminated with H bridges whose characteristic impedance matches their characteristic impedance, known as 14 terminations.In a signal interface, the 14 pins serve as pronged contacts.Based on its base H bridge ic number of LB1861, more closely related H bridge ics can be found.The H bridge is powered by a voltage supply of 6.7V.IC type BRUSHLESS DC MOTOR CONTROLLER is used as H bridge circuit's analog IC.A current of 1.5A flows through the pins of the output and power supply.It is through 14 pins that this bridge driver is able to perform its specific functions.There are numerous similarities between this H bridge motor driver and other parts in the subcategory of Motion Control Electronics.A high degree of efficiency is achieved by maintaining the operating supply voltage at 7V.A load of electricity is supplied by 12/24V.
LB1861M-TLM-H Features
Available in 14-LSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : LB1861
Number of Receivers: 7V
LB1861M-TLM-H Applications
There are a lot of ON Semiconductor LB1861M-TLM-H Full Bridge Drivers, Half-Bridge Drivers applications.
- Industrial Pumps
- Audio-visual equipment
- PC peripherals
- Voltage Regulators for DDR memory arrays
- Quad DC motor
- Desktop Computers
- CD players
- High current, low profile DC-DC converters
- DC-DC Converters
- VTR
