LB1930M-TLM-E
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-LSOP (0.173, 4.40mm Width) |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Media Player |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 2.2V~10.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3V |
| Terminal Pitch | 1mm |
| Base Part Number | LB1930 |
| JESD-30 Code | R-PDSO-G10 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 10.8V |
| Power Supplies | 3V |
| Supply Voltage-Min (Vsup) | 2.2V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 5μA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 1A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 31mA |
| Voltage - Load | 2.2V~10.8V |
| Motor Type - AC, DC | Brushed DC |
| Height Seated (Max) | 1.7mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LB1930M-TLM-E Overview
This package is designed to work with [0].The part is packaged in a 10-LSOP (0.173, 4.40mm Width) case.Ideally, the part should be mounted by Surface Mount.The component connected in Media Playermatches it perfectly.The device can supply 2.2V~10.8V volts.Regarding the operating temperature, it is in the range of -30°C~85°C TA°C.In this case, the motor type is Brushed DC.The part has 10terminations available.If the voltage is applied to the load at the rate of [0], the load will be affected.This amplifier should be operated at 3V.Ideally, it should be mounted in the Surface Mountposition.Maintain a current of 1A for the part output.This device utilizes the BRUSH DC MOTOR CONTROLLERanalog integrated circuit.Drivers controllers is based on the LB1930 part number.Drivers controllers belongs to Motion Control Electronics series.There is 10.8V supply voltage required for this driver.
LB1930M-TLM-E Features
Applications : Media Player
Load voltage across the chip 2.2V~10.8V
base on LB1930 number
LB1930M-TLM-E Applications
There are a lot of ON Semiconductor LB1930M-TLM-E motor drivers applications.
- Landscape lighting
- Automotive instrumentation
- Charge pump circuits
- RGB and monochromatic LED drivers for signage and traffic signals
- Handheld devices
- Horticultural applications
- Monitoring the energy that the luminaire uses
- Arena lighting
- Daytime running lights (DRLs)
- PDAs
