LB1930MC-AH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-SOP (0.154, 3.90mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | Media Player |
| Technology | Bipolar |
| Voltage - Supply | 2.2V~10.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3V |
| Base Part Number | LB1930M |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Max Output Current | 1A |
| Supply Voltage-Min (Vsup) | 2.2V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 15mA |
| Output Configuration | Half Bridge (2) |
| Halogen Free | Halogen Free |
| Collector Emitter Voltage (VCEO) | 10.8V |
| Max Collector Current | 1A |
| Voltage - Load | 2.2V~10.8V |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Height | 1.5mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LB1930MC-AH Overview
Drivers controllers is designed with Cut Tape (CT) package.Parts are packaged in 10-SOP (0.154, 3.90mm Width)cases.To mount the part by [0], it is recommended that you do so.For the component connected to [0], it is suitable.A device with a voltage range of 2.2V~10.8V volts is available.Operation temperature ranges from -30°C~85°C TA.This motor type can be categorized as Brushed DC.The part supports 10terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is important to remember that this amplifier should be run at 3V.The recommended way to mount it is Surface Mount.This device utilizes the BRUSH DC MOTOR CONTROLLERanalog integrated circuit.Using the LB1930Mpart number, it is located.A device with 10pins is available.The available outputs are [0].The motor type can be identified as Brushed.In order to achieve the operation requirements, the maximal output current reaches [0].
LB1930MC-AH Features
Applications : Media Player
Load voltage across the chip 2.2V~10.8V
base on LB1930M number
designed with 1 outputs
Motor Type classified as Brushed
LB1930MC-AH Applications
There are a lot of ON Semiconductor LB1930MC-AH motor drivers applications.
- Telltale lights
- Alternative to HID lights
- LED bias
- Scanning equipment
- Lighting for the ambience of tunability
- Dome
- High power LED street light
- Tail lights
- Matrix LED dimmers
- Brake lights
