LB1936V-TLM-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-LSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 740mW |
| Voltage - Supply | 2.5V~9.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LB1936V |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | Parallel |
| Nominal Supply Current | 800mA |
| Output Configuration | Half Bridge (4) |
| Collector Emitter Voltage (VCEO) | 9.5V |
| Max Collector Current | 800mA |
| Voltage - Load | 2.5V~9.5V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Height | 1.5mm |
| Length | 5.2mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LB1936V-TLM-E Overview
The package is designed with [0].16-LSSOP (0.173, 4.40mm Width)cases are included with the part.Drivers controllers is recommended to mount the part by Surface Mount.For the component connected to [0], it is suitable.There is a possibility of providing 2.5V~9.5Vvolts through the device.This device operates at a temperature of -20°C~85°C TA.In this part, there are 16 terminations available.Drivers controllers is possible to apply voltage to the load at the rate of 2.5V~9.5V.Drivers controllers is recommended that this amplifier be run at 5V.Its recommended mounting way is Surface Mount.LB1936Vis the part number that finds it.16pins are used in its design.Drivers controllers belongs to the series [0].1outputs are available in total.0 indicates that the motor type is [0].
LB1936V-TLM-E Features
Applications : General Purpose
Load voltage across the chip 2.5V~9.5V
base on LB1936V number
designed with 1 outputs
Motor Type classified as Stepper
LB1936V-TLM-E Applications
There are a lot of ON Semiconductor LB1936V-TLM-E motor drivers applications.
- Monitoring the energy that the luminaire uses
- Automotive applications
- Tail lights
- Smart lighting applications
- High power LED street light
- Indicator
- Tunnel lights
- LED bias
- Hazardous application
- Horticultural lighting
