LB1940T-MPB-H
| Parameters | |
|---|---|
| Output Voltage | 950mV |
| Operating Supply Voltage | 6.5V |
| Supply Voltage-Max (Vsup) | 7.5V |
| Power Supplies | 35V |
| Supply Voltage-Min (Vsup) | 1.9V |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Power Dissipation | 800mW |
| Output Current | 400mA |
| Halogen Free | Halogen Free |
| Output Current per Channel | 400mA |
| Supply Current-Max (Isup) | 7mA |
| Voltage - Load | 1.6V~7.5V |
| Load Type | Inductive |
| Height Seated (Max) | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LIFETIME (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | DC Motors, General Purpose, Stepper Motors |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 1.9V~6.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
LB1940T-MPB-H Overview
Tube is used to package H bridge.A cost-saving measure is taken to include H bridge in the 20-TSSOP (0.173, 4.40mm Width) package.Based on 1.9V~6.5V, improved reliabilbridge drivery can be achieved.H bridge circuit is mounted in the way of Surface Mount.Motor driver H bridge is possible for -20°C~85°C TA to operate normally at motor driver H bridges operating temperature.H bridge motor driver can be used for a variety of purposes, including DC Motors, General Purpose, Stepper Motors.Surface Mount is adopted as a technique to mount H gate on the PCB.A transmission line is terminated with a H bridge that matches its characteristic impedance, referred to as a 20 termination.An interface using 20 pins is used to provide pronged contact.H bridge circuit operates on a voltage of 5V.The analog IC type is STEPPER MOTOR CONTROLLER.A current of 400mA flows through the pins of the output and power supply.It is through 20 pins that this bridge driver is able to perform its specific functions.As part of the Motion Control Electronics subcategory, this H bridge motor driver has various similarities to other parts in this category.To ensure high efficiency, the operating supply voltage is maintained at 6.5V.A voltage of 950mV is released by the Hbridge.The electric power of 35V is supplied to the electrical load.
LB1940T-MPB-H Features
Available in 20-TSSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Number of Receivers: 6.5V
LB1940T-MPB-H Applications
There are a lot of ON Semiconductor LB1940T-MPB-H Full Bridge Drivers, Half-Bridge Drivers applications.
- PC peripherals
- High-Performance Gaming Motherboards
- Non-V-Core
- Compact Blade Servers
- OA equipments
- Workstations
- Industrial Pumps
- Desktop Computers
- High current, low profile DC-DC converters
- Bipolar stepper motor
