LB26WKW01-01-JE
| Parameters | |
|---|---|
| Illumination Type | Neon |
| Contact Current(AC)-Max | 3A |
| Contact (AC) Max Rating R Load | 3A@250VAC |
| Contact Timing | BREAK-BEFORE-MAKE |
| Contact Voltage(AC)-Max | 250V |
| Actuator Travel | 2.413 mm |
| Bushing Diameter | 0.866 inch |
| Actuator Length | 0.201 inch |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Ratings | Dust Tight, IP65, Water Resistant |
| Factory Lead Time | 1 Week |
| Mount | Front, Panel |
| Mounting Type | Panel Mount, Front |
| Insulation Material | DIALLYL PHTHALATE |
| Housing Material | GLASS FILLED REINFORCED NYLON |
| Center Contact Plating | GOLD OVER NICKEL |
| Terminal Material | PHOSPHOR BRONZE |
| End Contact Plating | GOLD OVER NICKEL |
| Operating Temperature | -25°C~50°C |
| Packaging | Bulk |
| Published | 2011 |
| Series | LB |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Solder |
| ECCN Code | EAR99 |
| Type | Standard, Illuminated |
| Terminal Finish | Silver (Ag) |
| Additional Feature | TWO RUBBER SEALS |
| Voltage - Rated DC | 30V |
| Current Rating (Amps) | 3A AC/DC |
| Orientation | Vertical |
| Ingress Protection | IP65 - Dust Tight, Water Resistant |
| Current Rating | 3A |
| Termination Style | Solder, Quick Connect - 0.110 (2.8mm) |
| Voltage - Rated AC | 125V |
| Body Length or Diameter | 15.7988mm |
| Body Breadth | 15.7988 mm |
| Actuator Type | Round, Button |
| Circuit | DPDT |
| Switch Function | On-On |
| Panel Cutout Dimensions | Circular - 22.00mm Dia |
| Contact Resistance | 0.05mOhm |
| Insulation Resistance | 200000000Ohm |
| Color - Actuator/Cap | Clear (Yellow Filter/Diffuser) |
| Illumination Voltage (Nominal) | 110VAC |
| Illumination Type, Color | Neon, Yellow |
| Sealing | EPOXY |
| Dielectric Withstanding Voltage | 1500VAC V |
| Electrical Life | 100,000 Cycles |
| Mechanical Life | 200,000 Cycles |
See Relate Datesheet
