LC4032B-10T44I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 30 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 2 |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4032B-10T44I Overview
Currently, there are 32 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.In the 44-TQFPpackage, you will find it.There are 30 I/Os on the board.The termination of a device is set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.There is 2.5V voltage supply for this device.It belongs to the family [0].Trayshould be used for packaging the chip.To ensure reliability, the device operates at a temperature of [0].Chips should be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000B series.There are 44 pins on the chip.This device can also display [0].There are related parts in [0].The 800gates serve as building blocks for digital circuits.High efficiency requires the supply voltage to be maintained at [0].In this case, EEPROMwill be used to store the data.This electronic part is mounted in the way of Surface Mount.It is designed with 44 pins.A maximum voltage of 2.7Vis required for operation.A minimum supply voltage of 2.3V is required for this device to operate.In total, there are 2 logic elements/blocks.A total of 100 Programmable I/Os are available.It should be below 400MHzat the maximal frequency.The input signals are detected by 2dedicated inputs.
LC4032B-10T44I Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins
LC4032B-10T44I Applications
There are a lot of Lattice Semiconductor Corporation LC4032B-10T44I CPLDs applications.
- STANDARD SERIAL INTERFACE UART
- Digital designs
- Multiple Clock Source Selection
- D/T registers and latches
- ON-CHIP OSCILLATOR CIRCUIT
- State machine control
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- LED Lighting systems
- High speed graphics processing
- Address decoders
