LC4032B-10TN44I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 30 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 10ns |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4032B-10TN44I Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the 44-TQFPpackage, you will find it.There are 30 I/Os on the board.There are 44 terminations programmed into the device.There is a QUADterminal position on the electrical part in question.It is powered by a voltage of 2.5V volts.There is a part included in Programmable Logic Devices.The chip should be packaged by Tray.The operating temperature of the machine is -40°C~105°C TJ to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.The ispMACH? 4000Bseries comprises this type of FPGA.Chips are programmed with 44 pins.The device can also be used to find [0].The LC4032indicates that its related parts can be found.There are 800 gates, which are devices that acts as a building block for digital circuits. The supply voltage should be maintained at 2.5V for high efficiency.Data storage is performed using [0].Surface Mountmounts this electronic component.The pins are [0].A maximum supply voltage of 2.7Vis used in its operation.Despite its minimal supply voltage of [0], it is capable of operating.There are a total of 100 Programmable I/Os.It is recommended that the maximum frequency be less than 400MHz.To detect input signals, there are 2 dedicated inputs.There are 2 logic elements/cells on the device.
LC4032B-10TN44I Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins
LC4032B-10TN44I Applications
There are a lot of Lattice Semiconductor Corporation LC4032B-10TN44I CPLDs applications.
- Bootloaders for FPGAs
- Power Meter SMPS
- Code converters
- Auxiliary Power Supply Isolated and Non-isolated
- Wide Vin Industrial low power SMPS
- USB Bus
- Software-driven hardware configuration
- High speed graphics processing
- Custom state machines
- DMA control
