LC4032B-25TN48C
| Parameters | |
|---|---|
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 32 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 2.5ns |
| Number of Logic Elements/Blocks | 2 |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
LC4032B-25TN48C Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is packaged with 48-LQFP.As a result, it has 32 I/O ports programmed.Terminations of devices are set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.There is 2.5V voltage supply for this device.This part is part of the family [0].Trayshould be used to package the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Ensure that the chip is mounted by Surface Mount.The FPGA belongs to the ispMACH? 4000B series.Chips are programmed with 48 pins.This device also displays [0].The LC4032indicates that its related parts can be found.For digital circuits, there are 800gates. These devices serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended to store data in [0].The electronic component is mounted by Surface Mount.This board has 48 pins.There is a maximum supply voltage of 2.7V.Normally, it operates with a voltage of 2.3VV as its minimum supply voltage.There are 2 logic elements/blocks.There are 100 Programmable I/Os.It is important to make sure that the maximum frequency is less than 400MHz.A total of 4dedicated inputs are available for the purpose of detecting input signals.
LC4032B-25TN48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4032B-25TN48C Applications
There are a lot of Lattice Semiconductor Corporation LC4032B-25TN48C CPLDs applications.
- Pattern recognition
- I/O PORTS (MCU MODULE)
- DDC INTERFACE
- Digital multiplexers
- I2C BUS INTERFACE
- Power automation
- Timing control
- Auxiliary Power Supply Isolated and Non-isolated
- D/T registers and latches
- Page register
