LC4032B-5TN48C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 32 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 2 |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4032B-5TN48C Overview
There are 32 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.There is a 48-LQFP package containing it.It is programmed with 32 I/Os.The termination of a device is set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 2.5Vprovides power to the device.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].Ideally, the chip should be mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4000B series.With 48pins programmed, the chip is ready to use.This device also displays [0].The LC4032shows its related parts.As a building block for digital circuits, there are 800gates.In order to maintain high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.This device is mounted by Surface Mount.The device has a pinout of [0].With a maximum supply voltage of [0], it operates.Normally, it operates with a voltage of 2.3VV as its minimum supply voltage.In total, there are 2 logic elements/blocks.A programmable I/O count of 100 has been recorded.There should be a lower maximum frequency than 400MHz.Input signals are detected using 4dedicated inputs.
LC4032B-5TN48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4032B-5TN48C Applications
There are a lot of Lattice Semiconductor Corporation LC4032B-5TN48C CPLDs applications.
- LED Lighting systems
- I/O PORTS (MCU MODULE)
- Multiple DIP Switch Replacement
- Digital designs
- Custom shift registers
- Discrete logic functions
- Parity generators
- Digital systems
- Complex programmable logic devices
- DDC INTERFACE
