LC4032B-75T44I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 30 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 2 |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4032B-75T44I Overview
Currently, there are 32 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is embedded in the 44-TQFP package.The device is programmed with 30 I/O ports.The device is programmed with 44 terminations.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.Power is provided by a supply voltage of 2.5V volts.There is a part included in Programmable Logic Devices.It is packaged in the way of Tray.During operation, the operating temperature is kept at -40°C~105°C TJ to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Bseries FPGA.It is equipped with 44 pin count.It is also possible to find YESwhen using this device.According to the LC4032, its related parts can be found.There are 800 gates, which are devices that acts as a building block for digital circuits. Optimal efficiency requires a supply voltage of [0].Data is stored using [0].Surface Mountis used to mount this electronic component.This board has 44 pins.This device operates at a voltage of 2.7V when the maximum supply voltage is applied.The minimal supply voltage is 2.3V.A logic element or block has 2elements.A total of 100Programmable I/Os are present.It is recommended that the maximal frequency be lower than 400MHz.To detect input signals, there are 2 dedicated inputs.
LC4032B-75T44I Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins
LC4032B-75T44I Applications
There are a lot of Lattice Semiconductor Corporation LC4032B-75T44I CPLDs applications.
- DDC INTERFACE
- Timing control
- Portable digital devices
- I/O expansion
- Pattern recognition
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Boolean function generators
- D/T registers and latches
- Code converters
- Complex programmable logic devices
