LC4032B-75T48C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 32 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 2 |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4032B-75T48C Overview
In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.It is contained in package [0].The device is programmed with 32 I/O ports.48terminations have been programmed into the device.QUADis the terminal position of this electrical part.Power is provided by a supply voltage of 2.5V volts.This part is in the family [0].Package the chip by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].There should be a Surface Mounton the chip.As part of the ispMACH? 4000Bseries, it is a type of FPGA.It is equipped with 48 pin count.It is also characterized by YES.The LC4032contains its related parts.The 800gates serve as building blocks for digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, EEPROMwill be used to store the data.Surface Mountmounts this electronic component.The 48pins are designed into the board.This device operates at a voltage of 2.7V when the maximum supply voltage is applied.A minimum supply voltage of 2.3V is required for it to operate.There are 2 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.A total of 100 Programmable I/Os are available.The maximum frequency should not exceed 400MHz.To detect the status of input signals, there are 4dedicated inputs.
LC4032B-75T48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4032B-75T48C Applications
There are a lot of Lattice Semiconductor Corporation LC4032B-75T48C CPLDs applications.
- Code converters
- Auxiliary Power Supply Isolated and Non-isolated
- DDC INTERFACE
- I/O PORTS (MCU MODULE)
- ROM patching
- Address decoders
- INTERRUPT SYSTEM
- State machine design
- Storage Cards and Storage Racks
- POWER-SAVING MODES
