LC4032B-75TN48C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 32 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 2 |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4032B-75TN48C Overview
32macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.There is a 48-LQFP package containing it.In this case, there are 32 I/Os programmed.48terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 2.5V is used as the power supply for this device.There is a part in the family [0].It is recommended to package the chip by Tray.A reliable operation is ensured by the operating temperature of [0].There should be a Surface Mounton the chip.This type of FPGA is a part of the ispMACH? 4000B series.With 48pins programmed, the chip is ready to use.The device can also be used to find [0].The LC4032can be used to identify its related parts.The 800gates serve as building blocks for digital circuits.High efficiency requires the supply voltage to be maintained at [0].It is recommended to store data in [0].The electronic component is mounted by Surface Mount.48pins are included in its design.It operates at a maximum supply voltage of 2.7V volts.With a minimal supply voltage of [0], it operates.There are 2 logic elements or blocks present.There are a total of 100 Programmable I/Os.400MHzis the maximum frequency.The status of input signals is detected by 4dedicated inputs.
LC4032B-75TN48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4032B-75TN48C Applications
There are a lot of Lattice Semiconductor Corporation LC4032B-75TN48C CPLDs applications.
- Programmable polarity
- Page register
- Digital designs
- Reset swapping
- Portable digital devices
- Software Configuration of Add-In Boards
- D/T registers and latches
- Address decoders
- Battery operated portable devices
- I/O PORTS (MCU MODULE)
