LC4032C-10TN48I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1.8mA |
| Number of I/O | 32 |
| Nominal Supply Current | 1.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 800 |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4032C-10TN48I Overview
32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is packaged with 48-LQFP.The device is programmed with 32 I/O ports.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power source is powered by 1.8Vvolts.This part is part of the family [0].It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Surface Mountshould be used for mounting the chip.In FPGA terms, it is a type of ispMACH? 4000Cseries FPGA.In this chip, the 48pins are programmed.When using this device, YESis also available.The LC4032shows its related parts.800gates are devices that serve as building blocks for digital circuits.High efficiency requires a voltage supply of [0].Data storage is performed using [0].Surface Mountmounts this electronic component.48pins are included in its design.A maximum voltage of 1.95Vis required for operation.A minimum supply voltage of 1.65V is required for it to operate.Programmable I/Os are counted up 100.There can be 125MHz frequency achieved.Input signals are detected using 4dedicated inputs.In order to form a fundamental building block, there are 2logic elements/cells.
LC4032C-10TN48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4032C-10TN48I Applications
There are a lot of Lattice Semiconductor Corporation LC4032C-10TN48I CPLDs applications.
- Software Configuration of Add-In Boards
- Digital multiplexers
- D/T registers and latches
- I2C BUS INTERFACE
- Dedicated input registers
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Multiple Clock Source Selection
- White goods (Washing, Cold, Aircon ,...)
- I/O PORTS (MCU MODULE)
- ON-CHIP OSCILLATOR CIRCUIT
