LC4032C-5T44C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1.8mA |
| Number of I/O | 30 |
| Nominal Supply Current | 1.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 128 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 2 |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4032C-5T44C Overview
Currently, there are 32 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.In the 44-TQFPpackage, you will find it.It is programmed with 30 I/Os.The device is programmed with 44 terminations.QUADis the terminal position of this electrical part.A voltage of 1.8V is used as the power supply for this device.There is a part included in Programmable Logic Devices.Package the chip by Tray.Due to its reliability, it is operated at a temperature of [0].Mount the chip by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Cseries FPGA.With 44pins programmed, the chip is ready to use.If you use this device, you will also find [0].There are related parts in [0].A digital circuit is built using 800gates.In order to maintain high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].This device is mounted by Surface Mount.The device has a pinout of [0].There is a maximum supply voltage of 1.95Vwhen the device is operating.The device is designed to operate with a minimal supply voltage of 1.65VV.In total, there are 2 logic elements/blocks.A total of 128 Programmable I/Os are available.The maximal frequency should be lower than 400MHz.The input signals are detected by 2dedicated inputs.
LC4032C-5T44C Features
44-TQFP package
30 I/Os
The operating temperature of 0°C~90°C TJ
44 pin count
44 pins
LC4032C-5T44C Applications
There are a lot of Lattice Semiconductor Corporation LC4032C-5T44C CPLDs applications.
- Software Configuration of Add-In Boards
- Multiple Clock Source Selection
- D/T registers and latches
- Boolean function generators
- USB Bus
- I/O PORTS (MCU MODULE)
- Digital multiplexers
- LED Lighting systems
- DMA control
- INTERRUPT SYSTEM
