LC4032C-5T48I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1.8mA |
| Number of I/O | 32 |
| Nominal Supply Current | 1.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 128 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 2 |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4032C-5T48I Overview
This network has 32macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).A 48-LQFP package contains the item.This device has 32 I/O ports programmed into it.48terminations are programmed into the device.This electrical part is wired with a terminal position of QUAD.The device is powered by a voltage of 1.8V volts.This part is included in Programmable Logic Devices.It is packaged in the way of Tray.The temperature at which it operates is set to -40°C~105°C TJin order to ensure its reliability.The chip should be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000C series.A chip with 48pins is programmed.This device also displays [0].The LC4032shows its related parts.A digital circuit can be constructed using 800gates.The supply voltage should be maintained at 1.8V for high efficiency.In this case, EEPROMwill be used to store the data.It is mounted by Surface Mount.48pins are included in its design.It operates with the maximal supply voltage of 1.95V.Despite its minimal supply voltage of [0], it is capable of operating.There are a total of 2 logic elements or blocks.A total of 128programmable I/Os are available.Ideally, the maximal frequency should be lower than 400MHz Hz.There are 4 dedicated inputs used to detect the status of input signals.
LC4032C-5T48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4032C-5T48I Applications
There are a lot of Lattice Semiconductor Corporation LC4032C-5T48I CPLDs applications.
- Reset swapping
- Digital systems
- INTERRUPT SYSTEM
- Field programmable gate
- Cross-Matrix Switch
- Preset swapping
- Power Meter SMPS
- Protection relays
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- POWER-SAVING MODES
