LC4032C-5TN44C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1.8mA |
| Number of I/O | 30 |
| Nominal Supply Current | 1.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 128 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4032C-5TN44C Overview
In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.It is part of the 44-TQFP package.The device is programmed with 30 I/Os.Terminations of devices are set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered by a voltage of 1.8V volts.The part is included in Programmable Logic Devices.Trayis the packaging method.The temperature at which it operates is set to 0°C~90°C TJin order to ensure its reliability.There should be a Surface Mounton the chip.This type of FPGA is a part of the ispMACH? 4000C series.The chip is programmed with 44 pins.Additionally, this device is capable of displaying [0].The LC4032indicates that related parts can be found.There are 800 gates, which are devices that acts as a building block for digital circuits. In order to achieve high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].The electronic part is mounted by Surface Mount.This board has 44 pins.There is a maximum supply voltage of 1.95V.In order for it to operate, a supply voltage of 1.65Vis required.There are 128 Programmable I/Os.Ideally, the maximal frequency should be lower than 400MHz Hz.Input signals are detected by 2dedicated inputs.The fundamental building block consists of 2logic elements/cells.
LC4032C-5TN44C Features
44-TQFP package
30 I/Os
The operating temperature of 0°C~90°C TJ
44 pin count
44 pins
LC4032C-5TN44C Applications
There are a lot of Lattice Semiconductor Corporation LC4032C-5TN44C CPLDs applications.
- Bootloaders for FPGAs
- I2C BUS INTERFACE
- Pattern recognition
- TIMERS/COUNTERS
- Configurable Addressing of I/O Boards
- Discrete logic functions
- USB Bus
- ROM patching
- Field programmable gate
- Preset swapping
