LC4032C-75T44C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1.8mA |
| Number of I/O | 30 |
| Nominal Supply Current | 1.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 128 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4032C-75T44C Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).44-TQFPis the package in which it resides.There are 30 I/Os programmed in it.44terminations have been programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.An electrical supply voltage of 1.8V is used to power it.It is a part of family [0].It is recommended to package the chip by Tray.The device operates at a temperature of 0°C~90°C TJin order to ensure its reliability.It is recommended to mount the chip by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000C series.There are 44pins on the chip.It is also possible to find YESwhen using this device.Its related parts can be found in the [0].The 800gates serve as building blocks for digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].Surface Mountis used to mount this electronic component.44pins are included in its design.There is a maximum supply voltage of 1.95V.Despite its minimal supply voltage of [0], it is capable of operating.There are 128 programmable I/Os in this system.It is recommended that the maximum frequency be less than 400MHz.The status of input signals is detected by 2dedicated inputs.Fundamental building blocks consist of 2logic elements/cells.
LC4032C-75T44C Features
44-TQFP package
30 I/Os
The operating temperature of 0°C~90°C TJ
44 pin count
44 pins
LC4032C-75T44C Applications
There are a lot of Lattice Semiconductor Corporation LC4032C-75T44C CPLDs applications.
- Wide Vin Industrial low power SMPS
- PULSE WIDTH MODULATION (PWM)
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Storage Cards and Storage Racks
- ON-CHIP OSCILLATOR CIRCUIT
- I/O expansion
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Boolean function generators
- I2C BUS INTERFACE
- Configurable Addressing of I/O Boards
