LC4032C-75TN48C
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1.8mA |
| Number of I/O | 32 |
| Nominal Supply Current | 1.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Gates | 800 |
| Number of Programmable I/O | 128 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Number of Logic Elements/Blocks | 2 |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
LC4032C-75TN48C Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].The device is programmed with 32 I/Os.Terminations of devices are set to [0].There is a QUADterminal position on the electrical part in question.There is 1.8V voltage supply for this device.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].It is mounted in the way of Surface Mount.This type of FPGA is a part of the ispMACH? 4000C series.In this chip, the 48pins are programmed.It is also characterized by YES.The LC4032indicates that its related parts can be found.It is possible to construct digital circuits using 800gates, which are devices that serve as building blocks.In order to achieve high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].Surface Mountmounts this electronic component.The device is designed with pins [0].A voltage of 1.95V is the maximum supply voltage for this device.The device is designed to operate with a minimal supply voltage of 1.65VV.A logic element or block has 2elements.Currently, there are 128 Programmable I/Os available.There is a maximum frequency of 178.57MHz.The input signals are detected by 4dedicated inputs.There are 36 logic elements/cells to form a fundamental building block.
LC4032C-75TN48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4032C-75TN48C Applications
There are a lot of Lattice Semiconductor Corporation LC4032C-75TN48C CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- D/T registers and latches
- Software Configuration of Add-In Boards
- I/O expansion
- Storage Cards and Storage Racks
- STANDARD SERIAL INTERFACE UART
- Digital multiplexers
- Custom state machines
- Random logic replacement
- I2C BUS INTERFACE
