LC4032V-25T44C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 30 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 128 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 2.5ns |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4032V-25T44C Overview
There are 32 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.There is a 44-TQFP package containing it.The device has 30inputs and outputs.There is a 44terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 3.3V.It is included in Programmable Logic Devices.It is recommended to package the chip by Tray.The operating temperature of the machine is 0°C~90°C TJ to ensure its reliability.There should be a Surface Mounton the chip.This type of FPGA is a part of the ispMACH? 4000V series.There are 44pins on the chip.This device is also capable of displaying [0].LC4032contains its related parts.800gates are devices that serve as building blocks for digital circuits.The supply voltage should be maintained at 3.3V for high efficiency.In order to store data, EEPROMis used.A Surface Mountis mounted on this electronic component.44pins are included in its design.A maximum voltage of 3.6Vis required for operation.It is powered by 3Vas its minimum supply voltage.A total of 128programmable I/Os are available.It should be below 400MHzat the maximal frequency.It has 2dedicated inputs for detecting input signals.An elementary building block consists of 2logic elements/cells.
LC4032V-25T44C Features
44-TQFP package
30 I/Os
The operating temperature of 0°C~90°C TJ
44 pin count
44 pins
LC4032V-25T44C Applications
There are a lot of Lattice Semiconductor Corporation LC4032V-25T44C CPLDs applications.
- ON-CHIP OSCILLATOR CIRCUIT
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Boolean function generators
- LED Lighting systems
- Dedicated input registers
- ROM patching
- Programmable polarity
- Digital multiplexers
- D/T registers and latches
- Multiple DIP Switch Replacement
