LC4032V-25TN48C
| Parameters | |
|---|---|
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 2.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Gates | 800 |
| Number of Programmable I/O | 128 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 2 |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 454.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 32 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
LC4032V-25TN48C Overview
In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.It is contained in package [0].The device is programmed with 32 I/Os.There are 48 terminations programmed into the device.QUADis the terminal position of this electrical part.Power is supplied by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.As a result, it is packaged as Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that Surface Mountholds the chip in place.This type of FPGA is a part of the ispMACH? 4000V series.It is programmed with 48 pins.If this device is used, you will also be able to find [0].The LC4032indicates that related parts can be found.There are 800 gates, which are devices that acts as a building block for digital circuits. Optimal efficiency requires a supply voltage of [0].It is adopted to store data in [0].A Surface Mountis mounted on this electronic component.There are 48pins on it.It operates at a maximum supply voltage of 3.6V volts.Initially, it requires a voltage of 3Vas the minimum supply voltage.There are 2 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.There are 128 Programmable I/Os.This can be achieved at a frequency of 454.5MHz.Input signals are detected by 4dedicated inputs.The fundamental building block consists of 36logic elements/cells.
LC4032V-25TN48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4032V-25TN48C Applications
There are a lot of Lattice Semiconductor Corporation LC4032V-25TN48C CPLDs applications.
- Synchronous or asynchronous mode
- Field programmable gate
- Programmable polarity
- Parity generators
- Address decoders
- White goods (Washing, Cold, Aircon ,...)
- Battery operated portable devices
- Pattern recognition
- I2C BUS INTERFACE
- TIMERS/COUNTERS
