LC4032V-5T48C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 32 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 144 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 2 |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4032V-5T48C Overview
There are 32 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].This device has 32 I/O ports programmed into it.48terminations have been programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.It is powered from a supply voltage of 3.3V.It is a part of family [0].As a result, it is packaged as Tray.A reliable operation is ensured by the operating temperature of [0].Surface Mountshould be used for mounting the chip.As part of the ispMACH? 4000Vseries, it is a type of FPGA.With 48pins programmed, the chip is ready to use.If you use this device, you will also find [0].In accordance with the [0], its related parts are listed.For digital circuits, there are 800gates. These devices serve as building blocks.If high efficiency is desired, the supply voltage should be kept at [0].Data is stored using [0].The electronic component is mounted by Surface Mount.The pins are [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.The device is designed to operate with a minimal supply voltage of 3VV.This logic element/block contains 2logic elements.A total of 144Programmable I/Os are present.It is recommended that the maximal frequency be lower than 400MHz.A total of 4dedicated inputs are available for detecting the status of input signals.
LC4032V-5T48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4032V-5T48C Applications
There are a lot of Lattice Semiconductor Corporation LC4032V-5T48C CPLDs applications.
- Pattern recognition
- STANDARD SERIAL INTERFACE UART
- Random logic replacement
- Parity generators
- Handheld digital devices
- Software-Driven Hardware Configuration
- ToR/Aggregation/Core Switch and Router
- D/T registers and latches
- Multiple Clock Source Selection
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
