LC4032V-75T48E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 32 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 176 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4032V-75T48E Overview
The mobile phone network has 32 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The item is packaged with 48-LQFP.There are 32 I/Os on the board.The device is programmed with 48 terminations.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.Power is supplied by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.The chip should be packaged by Tray.The temperature at which it operates is set to -40°C~130°C TJin order to ensure its reliability.It is mounted in the way of Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Vseries FPGA.It has 48pins programmed.When using this device, YESis also available.The LC4032shows its related parts.There are 800 gates, which are devices that acts as a building block for digital circuits. High efficiency requires a voltage supply of [0].Data storage is performed using [0].This device is mounted by Surface Mount.It is designed with 48 pins.A maximum supply voltage of 3.6Vis used in its operation.A minimum supply voltage of 3V is required for this device to operate.A programmable I/O count of 176 has been recorded.The maximum frequency should not exceed 400MHz.There are 4 dedicated inputs used to detect the status of input signals.In order to form a fundamental building block, there are 2 logic elements or cells.
LC4032V-75T48E Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~130°C TJ
48 pin count
48 pins
LC4032V-75T48E Applications
There are a lot of Lattice Semiconductor Corporation LC4032V-75T48E CPLDs applications.
- Field programmable gate
- Software Configuration of Add-In Boards
- Digital multiplexers
- High speed graphics processing
- Battery operated portable devices
- Storage Cards and Storage Racks
- Parity generators
- Preset swapping
- Multiple DIP Switch Replacement
- Software-Driven Hardware Configuration
