LC4032V-75TN44C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 30 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 800 |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 2 |
| Height | 1mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4032V-75TN44C Overview
32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the 44-TQFPpackage, you will find it.In this case, there are 30 I/Os programmed.The termination of a device is set to [0].QUADis the terminal position of this electrical part.Power is supplied by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.Trayshould be used to package the chip.Ensure its reliability by operating at [0].Mount the chip by Surface Mount.As part of the ispMACH? 4000Vseries, it is a type of FPGA.Chips are programmed with 44 pins.It is also characterized by YES.LC4032contains its related parts.A digital circuit can be constructed using 800gates.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].It is mounted by Surface Mount.The device is designed with pins [0].With a maximum supply voltage of [0], it operates.A minimum supply voltage of 3V is required for it to operate.There are 2 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.A frequency of 400MHzcan be achieved.There are 36logic blocks (LABs) that make up its basic building block.The input signals are detected by 2dedicated inputs.
LC4032V-75TN44C Features
44-TQFP package
30 I/Os
The operating temperature of 0°C~90°C TJ
44 pin count
44 pins
36 logic blocks (LABs)
LC4032V-75TN44C Applications
There are a lot of Lattice Semiconductor Corporation LC4032V-75TN44C CPLDs applications.
- Portable digital devices
- Synchronous or asynchronous mode
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- DDC INTERFACE
- USB Bus
- Software Configuration of Add-In Boards
- Wide Vin Industrial low power SMPS
- Power Meter SMPS
- Programmable polarity
- Page register
