LC4032ZC-35M56C
| Parameters | |
|---|---|
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 56 |
| JESD-30 Code | S-PBGA-B56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 50μA |
| Number of I/O | 32 |
| Nominal Supply Current | 50μA |
| Memory Type | EEPROM |
| Propagation Delay | 3.5 ns |
| Number of Gates | 800 |
| Max Frequency | 267MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 3.5ns |
| Number of Logic Elements/Blocks | 2 |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
LC4032ZC-35M56C Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).There is a 56-LFBGA, CSPBGA package containing it.The device has 32inputs and outputs.Devices are programmed with terminations of [0].This electrical part is wired with a terminal position of BOTTOM.The power supply voltage is 1.8V.This part is part of the family [0].Trayshould be used for packaging the chip.Due to its reliability, it is operated at a temperature of [0].It is recommended to mount the chip by Surface Mount.The ispMACH? 4000Zseries comprises this type of FPGA.The chip is programmed with 56 pins.Additionally, this device is capable of displaying [0].The LC4032can be used to identify its related parts.It is possible to construct digital circuits using 800gates, which are devices that serve as building blocks.For high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].In this case, it is mounted by Surface Mount.In this case, the maximum supply voltage is 1.9V.A minimum supply voltage of 1.7V is required for this device to operate.In total, there are 2 logic elements/blocks.There are 208 Programmable I/Os.Ideally, the maximal frequency should be lower than 267MHz Hz.Input signals are detected using 4dedicated inputs.
LC4032ZC-35M56C Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of 0°C~90°C TJ
56 pin count
LC4032ZC-35M56C Applications
There are a lot of Lattice Semiconductor Corporation LC4032ZC-35M56C CPLDs applications.
- State machine design
- High speed graphics processing
- DDC INTERFACE
- Software-Driven Hardware Configuration
- Complex programmable logic devices
- Pattern recognition
- I/O PORTS (MCU MODULE)
- USB Bus
- Digital designs
- Address decoding
