LC4032ZC-35T48C
| Parameters | |
|---|---|
| Max Frequency | 267MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 3.5ns |
| Number of Logic Elements/Blocks | 2 |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 50μA |
| Number of I/O | 32 |
| Nominal Supply Current | 50μA |
| Memory Type | EEPROM |
| Propagation Delay | 3.5 ns |
| Number of Gates | 800 |
LC4032ZC-35T48C Overview
32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is packaged with 48-LQFP.As you can see, this device has 32 I/O ports programmed into it.The termination of a device is set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.It is powered from a supply voltage of 1.8V.It is a part of family [0].It is recommended to package the chip by Tray.To ensure its reliability, the operating temperature is set to [0].Ideally, the chip should be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000Z series.With 48pins programmed, the chip is ready to use.The device can also be used to find [0].The LC4032shows its related parts.A digital circuit is built using 800gates.If high efficiency is desired, the supply voltage should be kept at [0].EEPROM is adopted for storing data.Surface Mountmounts this electronic component.48pins are included in its design.In this case, the maximum supply voltage is 1.9V.Initially, it requires a voltage of 1.7Vas the minimum supply voltage.There are 2 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.A total of 208 Programmable I/Os are available.Ideally, the maximal frequency should be lower than 267MHz Hz.A total of 4dedicated inputs are available for detecting the status of input signals.
LC4032ZC-35T48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4032ZC-35T48C Applications
There are a lot of Lattice Semiconductor Corporation LC4032ZC-35T48C CPLDs applications.
- DDC INTERFACE
- Boolean function generators
- Configurable Addressing of I/O Boards
- Software Configuration of Add-In Boards
- Timing control
- Custom state machines
- STANDARD SERIAL INTERFACE UART
- LED Lighting systems
- Programmable power management
- Pattern recognition
