LC4032ZC-5M56I
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 56 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 50μA |
| Number of I/O | 32 |
| Nominal Supply Current | 50μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Gates | 800 |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 2 |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Number of Pins | 56 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
LC4032ZC-5M56I Overview
There are 32 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.56-LFBGA, CSPBGAis the package in which it resides.As you can see, this device has 32 I/O ports programmed into it.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 1.8V.This part is included in Programmable Logic Devices.Trayis the packaging method.A reliable operation is ensured by the operating temperature of [0].There should be a Surface Mounton the chip.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.There are 56 pins on the chip.This device also displays [0].There are related parts in [0].There are 800 gates, which are devices that acts as a building block for digital circuits. High efficiency requires a voltage supply of [0].EEPROM is adopted for storing data.It is mounted by Surface Mount.There are 56 pins embedded in the device.There is a maximum supply voltage of 1.9V.Despite its minimal supply voltage of [0], it is capable of operating.There are a total of 2 logic elements or blocks.There are 208 programmable I/Os in this system.There is a maximum frequency of 250MHz.There are 4 dedicated inputs used to detect the status of input signals.The fundamental building block consists of 36logic elements/cells.
LC4032ZC-5M56I Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of -40°C~105°C TJ
56 pin count
56 pins
LC4032ZC-5M56I Applications
There are a lot of Lattice Semiconductor Corporation LC4032ZC-5M56I CPLDs applications.
- Synchronous or asynchronous mode
- Digital multiplexers
- Programmable polarity
- Address decoders
- High speed graphics processing
- Wide Vin Industrial low power SMPS
- Software-driven hardware configuration
- Digital systems
- Voltage level translation
- Code converters
