LC4032ZC-5MN56C
| Parameters | |
|---|---|
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 56 |
| JESD-30 Code | S-PBGA-B56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 50μA |
| Number of I/O | 32 |
| Nominal Supply Current | 50μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 800 |
| Max Frequency | 267MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
LC4032ZC-5MN56C Overview
In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.In the 56-LFBGA, CSPBGApackage, you will find it.There are 32 I/Os programmed in it.Devices are programmed with terminations of [0].This electrical part has a terminal position of BOTTOMand is connected to the ground.Power is provided by a supply voltage of 1.8V volts.This part is in the family [0].It is recommended to package the chip by Tray.A reliable operation is ensured by the operating temperature of [0].Surface Mountshould be used for mounting the chip.In terms of FPGAs, it belongs to the ispMACH? 4000Z series.There are 56pins on the chip.Additionally, this device is capable of displaying [0].The LC4032can be used to identify its related parts.800gates are devices that serve as building blocks for digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].A Surface Mountis mounted on this electronic component.There is a maximum supply voltage of 1.9Vwhen the device is operating.The device is designed to operate with a minimal supply voltage of 1.7VV.Programmable I/Os are counted up 208.It is recommended that the maximal frequency be lower than 267MHz.The status of input signals is detected by 4dedicated inputs.Fundamental building blocks consist of 2logic elements/cells.
LC4032ZC-5MN56C Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of 0°C~90°C TJ
56 pin count
LC4032ZC-5MN56C Applications
There are a lot of Lattice Semiconductor Corporation LC4032ZC-5MN56C CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Power Meter SMPS
- State machine control
- High speed graphics processing
- Wide Vin Industrial low power SMPS
- Power up sequencing
- Storage Cards and Storage Racks
- Address decoders
- Parity generators
