LC4032ZC-5MN56I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 56 |
| JESD-30 Code | S-PBGA-B56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 50μA |
| Number of I/O | 32 |
| Nominal Supply Current | 50μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Gates | 800 |
| Max Frequency | 267MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 2 |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4032ZC-5MN56I Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).You can find it in package [0].The device is programmed with 32 I/O ports.There is a 56terminations set on devices.The terminal position of this electrical part is BOTTOM, which serves as an important access point for passengers or freight.The power source is powered by 1.8Vvolts.The part is included in Programmable Logic Devices.Trayshould be used for packaging the chip.Ensure its reliability by operating at [0].There should be a Surface Mounton the chip.In FPGA terms, it is a type of ispMACH? 4000Zseries FPGA.There are 56pins on the chip.This device is also capable of displaying [0].According to the LC4032, its related parts can be found.In digital circuits, 800gates serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].The electronic part is mounted by Surface Mount.There is a maximum supply voltage of 1.9Vwhen the device is operating.Normally, it operates with a voltage of 1.7VV as its minimum supply voltage.In total, there are 2 logic elements/blocks.In total, there are 208programmable I/Os.Ideally, the maximal frequency should be lower than 267MHz Hz.There are 4 dedicated inputs used to detect the status of input signals.
LC4032ZC-5MN56I Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of -40°C~105°C TJ
56 pin count
LC4032ZC-5MN56I Applications
There are a lot of Lattice Semiconductor Corporation LC4032ZC-5MN56I CPLDs applications.
- State machine control
- Multiple DIP Switch Replacement
- Configurable Addressing of I/O Boards
- I/O expansion
- Interface bridging
- INTERRUPT SYSTEM
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Bootloaders for FPGAs
- LED Lighting systems
- Handheld digital devices
